۱۳۹۲ فروردین ۲۸, چهارشنبه

فهرست/سیاهه نماد ها/نشانه ها/رموز یاضی


This is a list of symbols found within all branches of mathematics to express a formula or to replace a constant.
When reading the list, it is important to recognize that a mathematical concept is independent of the symbol chosen to represent it. For many of the symbols below, the symbol is usually synonymous with the corresponding concept (ultimately an arbitrary choice made as a result of the cumulative history of mathematics), but in some situations a different convention may be used. For example, depending on context, "≡" may represent congruence or a definition. Further, in mathematical logic, numerical equality is sometimes represented by "≡" instead of "=", with the latter representing equality of well-formed formulas. In short, convention dictates the meaning.
Each symbol is shown both in HTML, whose display depends on the browser's access to an appropriate font installed on the particular device, and in TEX, as an image.

Contents

  [hide

[edit]Symbols

Symbol
in HTML
Symbol
in TEX
NameExplanationExamples
Read as
Category
=
=
is equal to;
equals
everywhere
x = y means x and y represent the same thing or value.2 = 2
1 + 1 = 2
\ne
is not equal to;
does not equal
everywhere
x \ne y means that x and y do not represent the same thing or value.

(The forms !=, /= or <> are generally used in programming languages where ease of typing and use of ASCII text is preferred.)
2 + 2 \ne 5
 <

 >
is less than,
is greater than
x < y means x is less than y.

x > y means x is greater than y.
3 < 4
5 > 4
is a proper subgroup of
H < G means H is a proper subgroup of G.5Z < Z
A_3 < S_3
\ll \!\,

\gg \!\,
is much less than,
is much greater than
x ≪ y means x is much less than y.

x ≫ y means x is much greater than y.
0.003 ≪ 1000000
asymptotic comparison
is of smaller order than,
is of greater order than
f ≪ g means the growth of f is asymptotically bounded by g.

(This is I. M. Vinogradov's notation. Another notation is the Big O notation, which looks like f = O(g).)
x ≪ ex
\le \!\,

\ge \!\,
is less than or equal to,
is greater than or equal to
x ≤ y means x is less than or equal to y.

x ≥ y means x is greater than or equal to y.

(The forms <= and >= are generally used in programming languages where ease of typing and use of ASCII text is preferred.)
3 ≤ 4 and 5 ≤ 5
5 ≥ 4 and 5 ≥ 5
is a subgroup of
H ≤ G means H is a subgroup of G.Z ≤ Z
A3  ≤ S3
is reducible to
A ≤ B means the problem A can be reduced to the problem B. Subscripts can be added to the ≤ to indicate what kind of reduction.If
\exists f \in F \mbox{ . } \forall x \in \mathbb{N} \mbox{ . } x \in A \Leftrightarrow f(x) \in B
then
A \leq_{F} B


\leqq \!\,

\geqq \!\,
...is less than ... is greater than...
7k ≡ 28 (mod 2) is only true if k is an even integer. Assume that the problem requires kto be non-negative; the domain is defined as 0 ≦ k ≦ ∞.10a ≡ 5 (mod 5)   for 1 ≦ a ≦ 10
... is less than or equal... is greater than or equal...
x ≦ y means that each component of vector x is less than or equal to each corresponding component of vector y.

x ≧ y means that each component of vector x is greater than or equal to each corresponding component of vector y.

It is important to note that x ≦ y remains true if every element is equal. However, if the operator is changed, x ≤ y is true if and only if x ≠ y is also true.
\prec \!\,
is Karp reducible to;
is polynomial-time many-one reducible to
L1 ≺ L2 means that the problem L1 is Karp reducible to L2.[1]If L1 ≺ L2 and L2 ∈ P, then L1 ∈ P.
\propto \!\,
is proportional to;
varies as
everywhere
y ∝ x means that y = kx for some constant k.if y = 2x, then y ∝ x.
is Karp reducible to;
is polynomial-time many-one reducible to
A ∝ B means the problem A can be polynomially reduced to the problem B.If L1 ∝ L2 and L2 ∈ P, then L1 ∈ P.
+
+ \!\,
plus;
add
4 + 6 means the sum of 4 and 6.2 + 7 = 9
the disjoint union of ... and ...
A1 + A2 means the disjoint union of sets A1 and A2.A1 = {3, 4, 5, 6} ∧ A2 = {7, 8, 9, 10} ⇒
A1 + A2 = {(3,1), (4,1), (5,1), (6,1), (7,2), (8,2), (9,2), (10,2)}
- \!\,
minus;
take;
subtract
9 − 4 means the subtraction of 4 from 9.8 − 3 = 5
negative;
minus;
the opposite of
−3 means the negative of the number 3.−(−5) = 5
minus;
without
A − B means the set that contains all the elements of A that are not in B.

(∖ can also be used for set-theoretic complement as described below.)
{1,2,4} − {1,3,4}  =  {2}
\pm \!\,
plus or minus
6 ± 3 means both 6 + 3 and 6 − 3.The equation x = 5 ± √4, has two solutions, x = 7 and x = 3.
plus or minus
10 ± 2 or equivalently 10 ± 20% means the range from 10 − 2 to 10 + 2.If a = 100 ± 1 mm, then a ≥ 99 mm and a ≤ 101 mm.
\mp \!\,
minus or plus
6 ± (3  5) means both 6 + (3 − 5) and 6 − (3 + 5).cos(x ± y) = cos(x) cos(y sin(x) sin(y).
\times \!\,
times;
multiplied by
3 × 4 means the multiplication of 3 by 4.

(The symbol * is generally used in programming languages, where ease of typing and use of ASCII text is preferred.)
7 × 8 = 56
the Cartesian product of ... and ...;
the direct product of ... and ...
X×Y means the set of all ordered pairs with the first element of each pair selected from X and the second element selected from Y.{1,2} × {3,4} = {(1,3),(1,4),(2,3),(2,4)}
cross
u × v means the cross product of vectors u and v(1,2,5) × (3,4,−1) =
(−22, 16, − 2)
the group of units of
R× consists of the set of units of the ring R, along with the operation of multiplication.

This may also be written Ras described below, or U(R).
\begin{align} (\mathbb{Z} / 5\mathbb{Z})^\times & = \{ [1], [2], [3], [4] \} \\ & \cong C_4 \\ \end{align}
*
* \!\,
times;
multiplied by
a * b means the product of a and b.

(Multiplication can also be denoted with × or ⋅, or even simple juxtaposition. * is generally used where ease of typing and use of ASCII text is preferred, such as programming languages.)
4 * 3 means the product of 4 and 3, or 12.
convolution;
convolved with
f * g means the convolution of f and g.(f * g)(t) = \int_{-\infty}^{\infty} f(\tau) g(t - \tau)\, d\tau.
conjugate
z* means the complex conjugate of z.

(\bar{z} can also be used for the conjugate of z, as described below.)
(3+4i)^\ast = 3-4i.
the group of units of
R* consists of the set of units of the ring R, along with the operation of multiplication.

This may also be written R× as described above, or U(R).
\begin{align} (\mathbb{Z} / 5\mathbb{Z})^\ast & = \{ [1], [2], [3], [4] \} \\ & \cong C_4 \\ \end{align}
the (set of) hyperreals
*R means the set of hyperreal numbers. Other sets can be used in place of R.*N is the hypernatural numbers.
Hodge dual;
Hodge star
*v means the Hodge dual of a vector v. If v is a k-vector within an n-dimensionaloriented inner product space, then *v is an (nk)-vector.If \{e_i\} are the standard basis vectors of \mathbb{R}^5*(e_1\wedge e_2\wedge e_3)= e_4\wedge e_5
\cdot \!\,
times;
multiplied by
3 · 4 means the multiplication of 3 by 4.7 · 8 = 56
dot
u · v means the dot product of vectors u and v(1,2,5) · (3,4,−1) = 6
placeholder
(silent)
A   ·   means a placeholder for an argument of a function. Indicates the functional nature of an expression without assigning a specific symbol for an argument.\|\cdot\|
\otimes \!\,
tensor product of
V \otimes U means the tensor product of V and U.[3] V \otimes_R U means the tensor product of modules V and U over the ring R.{1, 2, 3, 4}  {1, 1, 2} =
{{1, 2, 3, 4}, {1, 2, 3, 4}, {2, 4, 6, 8}}
 
{\,\wedge\!\!\!\!\!\!\bigcirc\,}
Kulkarni–Nomizu product
Derived from the tensor product of two symmetric type (0,2) tensors; it has the algebraic symmetries of the Riemann tensorf=g{\,\wedge\!\!\!\!\!\!\bigcirc\,}h has components f_{\alpha\beta\gamma\delta}=g_{\alpha\gamma}h_{\beta\delta}+g_{\beta\delta}h_{\alpha\gamma}-g_{\alpha\delta}h_{\beta\gamma}-g_{\beta\gamma}h_{\alpha\delta}.
\div \!\,

/ \!\,
divided by;
over
6 ÷ 3 or 6 ⁄ 3 means the division of 6 by 3.2 ÷ 4 = 0.5

12 ⁄ 4 = 3
mod
G / H means the quotient of group G modulo its subgroup H.{0, a, 2abb+ab+2a} / {0, b} = {{0, b}, {ab+a}, {2ab+2a}}
quotient set
mod
A/~ means the set of all ~ equivalence classes in A.If we define ~ by x ~ y ⇔ x − y ∈ , then
/~ = { {x + n : n ∈  } : x ∈ [0,1) }
\surd \!\,

\sqrt{\ } \!\,
the (principal) square root of
\sqrt{x} means the nonnegative number whose square is x.\sqrt{4}=2
the (complex) square root of
if z=r\,\exp(i\phi) is represented in polar coordinates with -\pi < \phi \le \pi, then \sqrt{z} = \sqrt{r} \exp(i \phi/2).\sqrt{-1}=i
x
\bar{x} \!\,
overbar;
… bar
\bar{x} (often read as “x bar”) is the mean (average value of x_i).x = \{1,2,3,4,5\}; \bar{x} = 3.
conjugate
\overline{z} means the complex conjugate of z.

(zcan also be used for the conjugate of z, as described above.)
\overline{3+4i} = 3-4i.
finite sequence, tuple
\overline{a} means the finite sequence/tuple (a_1,a_2, ... ,a_n)..\overline{a}:=(a_1,a_2, ... ,a_n).
algebraic closure of
\overline{F} is the algebraic closure of the field F.The field of algebraic numbers is sometimes denoted as \overline{\mathbb{Q}} because it is the algebraic closure of therational numbers {\mathbb{Q}}.
(topological) closure of
\overline{S} is the topological closure of the set S.

This may also be denoted as cl(Sor Cl(S).
In the space of the real numbers, \overline{\mathbb{Q}} = \mathbb{R} (the rational numbers are dense in the real numbers).
â
\hat a
hat
\mathbf{\hat a} (pronounced "a hat") is the normalized version of vector \mathbf a, having length 1.
|…|
| \ldots | \!\,
absolute value of; modulus of
|x| means the distance along the real line (or across the complex plane) between x andzero.|3| = 3

|–5| = |5| = 5

i | = 1

| 3 + 4i | = 5
Euclidean norm or Euclidean length or magnitude
Euclidean norm of
|x| means the (Euclidean) length of vector x.For x = (3,-4)
|\textbf{x}| = \sqrt{3^2 + (-4)^2} = 5
determinant of
|A| means the determinant of the matrix A\begin{vmatrix}
 1&2 \\
 2&9 \\
\end{vmatrix} = 5
cardinality of;
size of;
order of
|X| means the cardinality of the set X.

(# may be used instead as described below.)
|{3, 5, 7, 9}| = 4.
||…||
\| \ldots \| \!\,
norm of;
length of
|| x || means the norm of the element x of a normed vector space.[4]|| x  + y || ≤  || x ||  +  || y ||
nearest integer to
||x|| means the nearest integer to x.

(This may also be written [x], ⌊x⌉, nint(xor Round(x).)
||1|| = 1, ||1.6|| = 2, ||−2.4|| = −2, ||3.49|| = 3


\mid \!\,

 \nmid \!\,
divides
a|b means a divides b.
ab means a does not divide b.

(This symbol can be difficult to type, and its negation is rare, so a regular but slightly shorter vertical bar | character can be used.)
Since 15 = 3×5, it is true that 3|15 and 5|15.
given
P(A|B) means the probability of the event a occurring given that b occurs.if X is a uniformly random day of the year P(X is May 25 | X is in May) = 1/31
restriction of … to …;
restricted to
f|A means the function f restricted to the set A, that is, it is the function with domainA ∩ dom(f) that agrees with f.The function f : R → R defined by f(x) = x2 is not injective, but f|R+ is injective.
such that
such that;
so that
everywhere
| means “such that”, see ":" (described below).S = {(x,y) | 0 < y < f(x)}
The set of (x,y) such that y is greater than 0 and less than f(x).
||
\| \!\,
is parallel to
x || y means x is parallel to y.If l || m and m ⊥ n then l ⊥ n.
is incomparable to
x || y means x is incomparable to y.{1,2} || {2,3} under set containment.
exact divisibility
exactly divides
pa || n means pa exactly divides n (i.e. pa divides n but pa+1 does not).23 || 360.
#
\# \!\,
cardinality of;
size of;
order of
#X means the cardinality of the set X.

(|…| may be used instead as described above.)
#{4, 6, 8} = 3
connected sum of;
knot sum of;
knot composition of
A#B is the connected sum of the manifolds A and B. If A and B are knots, then this denotes the knot sum, which has a slightly stronger condition.A#Sm is homeomorphic to A, for any manifold A, and the sphere Sm.
primorial
n# is product of all prime numbers less than or equal to n.12# = 2 × 3 × 5 × 7 × 11 = 2310
\aleph \!\,
aleph
α represents an infinite cardinality (specifically, the α-th one, where α is an ordinal).|ℕ| = ℵ0, which is called aleph-null.
\beth \!\,
beth
α represents an infinite cardinality (similar to ℵ, but ℶ does not necessarily index all of the numbers indexed by ℵ. ).\beth_1 = |P(\mathbb{N})| = 2^{\aleph_0}.
𝔠
\mathfrak c \!\,
cardinality of the continuum;
c;
cardinality of the real numbers
The cardinality of \mathbb R is denoted by |\mathbb R| or by the symbol \mathfrak c (a lowercase Fraktur letter C).\mathfrak c = {\beth}_{1}
:
: \!\,
such that
such that;
so that
everywhere
 : means “such that”, and is used in proofs and the set-builder notation (described below).∃ n ∈ ℕ: n is even.
extends;
over
K : F means the field K extends the field F.

This may also be written as K ≥ F.
ℝ : ℚ
inner product of matrices
inner product of
A : B means the Frobenius inner product of the matrices A and B.

The general inner product is denoted by ⟨uv⟩, ⟨u | v⟩ or (u | v), as described below. For spatial vectors, the dot product notation, x·y is common. See also Bra-ket notation.
A:B = \sum_{i,j} A_{ij}B_{ij}
index of subgroup
The index of a subgroup H in a group G is the "relative size" of H in G: equivalently, the number of "copies" (cosets) of H that fill up G|G:H| = \frac{|G|}{|H|}
!
! \!\,
not
The statement !A is true if and only if A is false.

A slash placed through another operator is the same as "!" placed in front.

(The symbol ! is primarily from computer science. It is avoided in mathematical texts, where the notation ¬A is preferred.)
 !(!A) ⇔ A
x ≠ y  ⇔  !(x = y)
factorial
n! means the product 1 × 2 × ... × n.4! = 1\times2\times3\times4 = 24
 
{\ \choose\ }
n choose k
\begin{pmatrix} n \\ k \end{pmatrix}
=\frac{n!/(n-k)!}{k!}
= \frac{(n-k+1)\cdots(n-2)\cdot(n-1)\cdot n}{k!}
means (in the case of n = positive integer) the number of combinations of k elements drawn from a set of n elements.

(This may also be written as C(nk), nCk or nCk.)
\begin{pmatrix} 73 \\ 5 \end{pmatrix} = 
\frac{73!/(73-5)!}{5!}
=\frac{69\cdot 70\cdot 71\cdot 72\cdot 73}{1\cdot2\cdot3\cdot4\cdot5}=15020334

\begin{pmatrix} .5 \\ 7 \end{pmatrix}=\frac{-5.5\cdot-4.5\cdot-3.5\cdot-2.5\cdot-1.5\cdot-.5\cdot.5}{1\cdot2\cdot3\cdot4\cdot5\cdot6\cdot7}=\frac{33}{2048}\,\!
 
\left(\!\!{\ \choose\ }\!\!\right)
u multichoose k
\left(\!\!{u\choose k}\!\!\right)={u+k-1\choose k}
=\frac{(u+k-1)!/(u-1)!}{k!}
                           (when u is positive integer)
means reverse or rising binomial coefficient.

\left(\!\!{-5.5\choose 7}\!\!\right)=\frac{-5.5\cdot-4.5\cdot-3.5\cdot-2.5\cdot-1.5\cdot-.5\cdot.5}{1\cdot2\cdot3\cdot4\cdot5\cdot6\cdot7}={.5\choose 7}=\frac{33}{2048}\,\!
~
\sim \!\,
has distribution
X ~ D, means the random variable X has the probability distribution D.X ~ N(0,1), the standard normal distribution
is row equivalent to
A~B means that B can be generated by using a series of elementary row operations onA\begin{bmatrix}
 1&2 \\
 2&4 \\
\end{bmatrix} \sim \begin{bmatrix}
 1&2 \\
 0&0 \\
\end{bmatrix}
roughly similar;
poorly approximates
m ~ n means the quantities m and n have the same order of magnitude, or general size.

(Note that ~ is used for an approximation that is poor, otherwise use ≈ .)
2 ~ 5

8 × 9 ~ 100

but π2 ≈ 10
is asymptotically equivalent to
f ~ g means \lim_{n\to\infty} \frac{f(n)}{g(n)} = 1.x ~ x+1
are in the same equivalence class
everywhere
a ~ b means b \in [a] (and equivalently a \in [b]).1 ~ 5 mod 4
\approx \!\,
approximately equal
is approximately equal to
everywhere
x ≈ y means x is approximately equal to y.

This may also be written ≃, ≅, ~, ♎ (Libra Symbol), or ≒.
π ≈ 3.14159
is isomorphic to
G ≈ H means that group G is isomorphic (structurally identical) to group H.

( can also be used for isomorphic, as described below.)
Q / {1, −1} ≈ V,
where Q is the quaternion group and V is the Klein four-group.
\wr \!\,
wreath product of … by …
A ≀ H means the wreath product of the group A by the group H.

This may also be written A wr H.
S_n \wr Z_2 is isomorphic to the automorphism group of the complete bipartite graph on (n,n) vertices.


\triangleleft \!\,

\triangleright \!\,
is a normal subgroup of
N  G means that N is a normal subgroup of group G.Z(G G
is an ideal of
I  R means that I is an ideal of ring R.(2)  Z
the antijoin of
R  S means the antijoin of the relations R and S, the tuples in R for which there is not a tuple in S that is equal on their common attribute names.R \triangleright S = R - R \ltimes S


\ltimes \!\,

\rtimes \!\,
the semidirect product of
N ⋊φ H is the semidirect product of N (a normal subgroup) and H (a subgroup), with respect to φ. Also, if G = N φ H, then G is said to split over N.

( may also be written the other way round, as or as ×.)
D_{2n} \cong C_n \rtimes C_2
the semijoin of
R ⋉ S is the semijoin of the relations R and S, the set of all tuples in R for which there is a tuple in S that is equal on their common attribute names.R \ltimes S = \Pia1,..,an(R \bowtie S)
\bowtie \!\,
the natural join of
R ⋈ S is the natural join of the relations R and S, the set of all combinations of tuples inR and S that are equal on their common attribute names.
\therefore \!\,
therefore;
so;
hence
everywhere
Sometimes used in proofs before logical consequences.All humans are mortal. Socrates is a human. ∴ Socrates is mortal.
\because \!\,
because;
since
everywhere
Sometimes used in proofs before reasoning.11 is prime ∵ it has no positive integer factors other than itself and one.








\blacksquare \!\,

\Box \!\,

\blacktriangleright \!\,
QED;
tombstone;
Halmos symbol
everywhere
Used to mark the end of a proof.

(May also be written Q.E.D.)
non-Euclidean Laplacian
It is the generalisation of the Laplace operator in the sense that it is the differential operator which is invariant under the isometry group of the underlying space and it reduces to the Laplace operator if restricted to time independent functions.\square = \frac{1}{c^2}{\partial^2 \over \partial t^2 } - {\partial^2 \over \partial x^2 } - {\partial^2 \over \partial y^2 } - {\partial^2 \over \partial z^2 }




\Rightarrow \!\,

\rightarrow \!\,

\supset \!\,
implies;
if … then
A ⇒ B means if A is true then B is also true; if A is false then nothing is said about B.

(→ may mean the same as ⇒, or it may have the meaning for functions given below.)

(⊃ may mean the same as ⇒,[5] or it may have the meaning for superset given below.)
x = 2  ⇒  x2 = 4 is true, but x2 = 4   ⇒  x = 2 is in general false (since x could be −2).


\Leftrightarrow \!\,

\leftrightarrow \!\,
if and only if;
iff
A ⇔ B means A is true if B is true and A is false if B is false.x + 5 = y + 2  ⇔  x + 3 = y
¬

˜
\neg \!\,

\sim \!\,
not
The statement ¬A is true if and only if A is false.

A slash placed through another operator is the same as "¬" placed in front.

(The symbol ~ has many other uses, so ¬ or the slash notation is preferred. Computer scientists will often use ! but this is avoided in mathematical texts.)
¬(¬A) ⇔ A
x ≠ y  ⇔  ¬(x =  y)
\and \!\,
and;
min;
meet
The statement A ∧ B is true if A and B are both true; else it is false.

For functions A(x) and B(x), A(x) ∧ B(x) is used to mean min(A(x), B(x)).
n < 4  ∧  n >2  ⇔  n = 3 when n is a natural number.
wedge product;
exterior product
u ∧ v means the wedge product of any multivectors u and v. In three dimensionalEuclidean space the wedge product and the cross product of two vectors are each other's Hodge dual.u \wedge v = *(u \times v)\ \text{ if } u, v \in \mathbb{R}^3
… (raised) to the power of …
everywhere
a ^ b means a raised to the power of b

(a ^ b is more commonly written abThe symbol ^ is generally used in programming languages where ease of typing and use of plain ASCII text is preferred.)
2^3 = 23 = 8
\or \!\,
logical disjunction or join in a lattice
or;
max;
join
The statement A ∨ B is true if A or B (or both) are true; if both are false, the statement is false.

For functions A(x) and B(x), A(x) ∨ B(x) is used to mean max(A(x), B(x)).
n ≥ 4  ∨  n ≤ 2  ⇔ n ≠ 3 when n is a natural number.


\oplus \!\,

\veebar \!\,
xor
The statement A ⊕ B is true when either A or B, but not both, are true. A  B means the same.A) ⊕ A is always true, A ⊕ A is always false.
direct sum of
The direct sum is a special way of combining several objects into one general object.

(The bun symbol ⊕, or the coproduct symbol , is used;  is only for logic.)
Most commonly, for vector spaces UV, and W, the following consequence is used:
U = V ⊕ W ⇔ (U = V + W) ∧ (V ∩ W = {0})
\forall \!\,
for all;
for any;
for each
∀ xP(x) means P(x) is true for all x.∀ n ∈ n2 ≥ n.
\exists \!\,
there exists;
there is;
there are
∃ xP(x) means there is at least one x such that P(x) is true.∃ n ∈ n is even.
∃!
\exists! \!\,
there exists exactly one
∃! xP(x) means there is exactly one x such that P(x) is true.∃! n ∈ n + 5 = 2n.
=:

:=



:⇔





=: \!\,

:= \!\,

\equiv \!\,

:\Leftrightarrow \!\,

\triangleq \!\,

\overset{\underset{\mathrm{def}}{}}{=} \!\,

\doteq \!\,
is defined as;
is equal by definition to
everywhere
x := yy =: x or x ≡ y means x is defined to be another name for y, under certain assumptions taken in context.

(Some writers use ≡ to mean congruence).

P :⇔ Q means P is defined to be logically equivalent to Q.
\cosh x := \frac{e^x + e^{-x}}{2}
\cong \!\,
is congruent to
△ABC  △DEF means triangle ABC is congruent to (has the same measurements as) triangle DEF.
is isomorphic to
G  H means that group G is isomorphic (structurally identical) to group H.

(≈ can also be used for isomorphic, as described above.)
\mathbb{R}^2 \cong \mathbb{C}.
\equiv \!\,
... is congruent to ... modulo ...
a ≡ b (mod n) means a − b is divisible by n5 ≡ 2 (mod 3)
{ , }
{\{\ ,\!\ \}} \!\,
set brackets
the set of …
{a,b,c} means the set consisting of ab, and c.[6] = { 1, 2, 3, …}
{ : }

{ | }

{ ; }
\{\ :\ \} \!\,

\{\ |\ \} \!\,

\{\ ;\ \} \!\,
the set of … such that
{x : P(x)} means the set of all x for which P(x) is true.[6] {x | P(x)} is the same as {x : P(x)}.{n ∈  : n2 < 20} = { 1, 2, 3, 4}


{ }
\empty \!\,

\varnothing \!\,

\{\} \!\,
the empty set
 means the set with no elements.[6] { } means the same.{n ∈  : 1 < n2 < 4} = 


\in \!\,

\notin \!\,
is an element of;
is not an element of
everywhere, set theory
a ∈ S means a is an element of the set S;[6] a  S means a is not an element of S.[6](1/2)−1 ∈ 

2−1  
\ni
such that symbol
such that
often abbreviated as "s.t."; : and | are also used to abbreviate "such that". The use of goes back to early mathematical logic and its usage in this sense is declining.Choose x  2|x and 3|x. (Here | is used in the sense of "divides".)
contains as an element
Se means the same thing as eS, where S is a set and e is an element of S.
\not\ni
does not contain as an element
Se means the same thing as eS, where S is a set and e is not an element of S.


\subseteq \!\,

\subset \!\,
is a subset of
(subset) A ⊆ B means every element of A is also an element of B.[7]

(proper subset) A ⊂ B means A ⊆ B but A ≠ B.

(Some writers use the symbol ⊂ as if it were the same as ⊆.)
(A ∩ B) ⊆ A

 ⊂ 

 ⊂ 


\supseteq \!\,

\supset \!\,
is a superset of
A ⊇ B means every element of B is also an element of A.

A ⊃ B means A ⊇ B but A ≠ B.

(Some writers use the symbol ⊃ as if it were the same as ⊇.)
(A ∪ B) ⊇ B

 ⊃ 
\cup \!\,
the union of … or …;
union
A ∪ B means the set of those elements which are either in A, or in B, or in both.[7]A ⊆ B  ⇔  (A ∪ B) = B
\cap \!\,
intersected with;
intersect
A ∩ B means the set that contains all those elements that A and B have in common.[7]{x ∈  : x2 = 1} ∩  = {1}
\vartriangle \!\,
symmetric difference
A ∆ B means the set of elements in exactly one of A or B.

(Not to be confused with delta, Δ, described below.)
{1,5,6,8} ∆ {2,5,8} = {1,2,6}
\setminus \!\,
minus;
without
A  B means the set that contains all those elements of A that are not in B.[7]

(− can also be used for set-theoretic complement as described above.)
{1,2,3,4}  {3,4,5,6} = {1,2}
\to \!\,
function arrow
from … to
fX → Y means the function f maps the set X into the set Y.Let f → ∪{0} be defined by f(x) := x2.
\mapsto \!\,
function arrow
maps to
fa ↦ b means the function f maps the element a to the element b.Let fx ↦ x+1 (the successor function).
\circ \!\,
composed with
fg is the function, such that (fg)(x) = f(g(x)).[8]if f(x) := 2x, and g(x) := x + 3, then (fg)(x) = 2(x + 3).
o
\circ \!\,
entrywise product
For two matrices (or vectors) of the same dimensions  A, B \in {\mathbb R}^{m \times n}  the Hadamard product is a matrix of the same dimensions  A \circ B \in {\mathbb R}^{m \times n}  with elements given by  (A \circ B)_{i,j} = (A)_{i,j} \cdot (B)_{i,j}. This is often used in matrix based programming such as MATLAB where the operation is done by A.*B\begin{bmatrix}
 1&2 \\
 2&4 \\
\end{bmatrix} \circ \begin{bmatrix}
 1&2 \\
 0&0 \\
\end{bmatrix} = \begin{bmatrix}
 1&4 \\
 0&0 \\
\end{bmatrix}


N
\mathbb{N} \!\,

\mathbf{N} \!\,
N;
the (set of) natural numbers
N means either { 0, 1, 2, 3, ...} or { 1, 2, 3, ...}.

The choice depends on the area of mathematics being studied; e.g. number theoristsprefer the latter; analystsset theorists and computer scientists prefer the former. To avoid confusion, always check an author's definition of N.

Set theorists often use the notation ω (for least infinite ordinal) to denote the set of natural numbers (including zero), along with the standard ordering relation ≤.
 = {|a| : a ∈ or  = {|a| > 0: a ∈ }


Z
\mathbb{Z} \!\,

\mathbf{Z} \!\,
Z;
the (set of) integers
 means {..., −3, −2, −1, 0, 1, 2, 3, ...}.
+ or > means {1, 2, 3, ...} . * or  means {0, 1, 2, 3, ...} .
 = {p, −p : p ∈  ∪ {0}​}
n

p

Zn

Zp
\mathbb{Z}_n \!\,

\mathbb{Z}_p \!\,

\mathbf{Z}_n \!\,

\mathbf{Z}_p \!\,
Zn;
the (set of) integers modulon
n means {[0], [1], [2], ...[n−1]} with addition and multiplication modulo n.

Note that any letter may be used instead of nsuch as pTo avoid confusion with p-adic numbers, use /p or /(pinstead.
3 = {[0], [1], [2]}
the (set of) p-adic integers


Note that any letter may be used instead of psuch as n or l.


P
\mathbb{P} \!\,

\mathbf{P} \!\,
P;
the projective space;
the projective line;
the projective plane
 means a space with a point at infinity.\mathbb{P}^1,\mathbb{P}^2
the probability of
(X) means the probability of the event X occurring.

This may also be written as P(X), Pr(X), P[X] or Pr[X].
If a fair coin is flipped, (Heads) = (Tails) = 0.5.


Q
\mathbb{Q} \!\,

\mathbf{Q} \!\,
Q;
the (set of) rational numbers;
the rationals
 means {p/q : p ∈ q ∈ }.3.14000... ∈ 

π  


R
\mathbb{R} \!\,

\mathbf{R} \!\,
R;
the (set of) real numbers;
the reals
 means the set of real numbers.π ∈ 

√(−1)  


C
\mathbb{C} \!\,

\mathbf{C} \!\,
C;
the (set of) complex numbers
 means {a + b i : a,b ∈ }.i = √(−1) ∈ 


H
\mathbb{H} \!\,

\mathbf{H} \!\,
quaternions or Hamiltonian quaternions
H;
the (set of) quaternions
 means {a + b i + c j + d k : a,b,c,d ∈ }.
O
O
big-oh of
The Big O notation describes the limiting behavior of a function, when the argument tends towards a particular value or infinity.If f(x) = 6x4 − 2x3 + 5 and g(x) = x4 , then f(x)=O(g(x))\mbox{ as }x\to\infty\,
\infty \!\,
infinity
∞ is an element of the extended number line that is greater than all real numbers; it often occurs in limits.\lim_{x\to 0} \frac{1}{|x|} = \infty
⌊…⌋
\lfloor \ldots \rfloor \!\,
floor;
greatest integer;
entier
x⌋ means the floor of x, i.e. the largest integer less than or equal to x.

(This may also be written [x], floor(xor int(x).)
⌊4⌋ = 4, ⌊2.1⌋ = 2, ⌊2.9⌋ = 2, ⌊−2.6⌋ = −3
⌈…⌉
\lceil \ldots \rceil \!\,
ceiling
x⌉ means the ceiling of x, i.e. the smallest integer greater than or equal to x.

(This may also be written ceil(xor ceiling(x).)
⌈4⌉ = 4, ⌈2.1⌉ = 3, ⌈2.9⌉ = 3, ⌈−2.6⌉ = −2
⌊…⌉
\lfloor \ldots \rceil \!\,
nearest integer to
x⌉ means the nearest integer to x.

(This may also be written [x], ||x||, nint(xor Round(x).)
⌊2⌉ = 2, ⌊2.6⌉ = 3, ⌊-3.4⌉ = -3, ⌊4.49⌉ = 4
[ : ]
[\ :\ ] \!\,
the degree of
[K : F] means the degree of the extension K : F.[ℚ(√2) : ℚ] = 2

[ℂ : ℝ] = 2

[ℝ : ℚ] = ∞
[ ]

[ , ]

[ , , ]
[\ ] \!\,

[\ ,\ ] \!\,

[\ ,\ ,\ ] \!\,
the equivalence class of
[a] means the equivalence class of a, i.e. {x : x ~ a}, where ~ is an equivalence relation.

[a]R means the same, but with R as the equivalence relation.
Let a ~ b be true iff a ≡ b (mod 5).
Then [2] = {…, −8, −3, 2, 7, …}.
floor;
greatest integer;
entier
[x] means the floor of x, i.e. the largest integer less than or equal to x.

(This may also be written ⌊x⌋, floor(xor int(x). Not to be confused with the nearest integer function, as described below.)
[3] = 3, [3.5] = 3, [3.99] = 3, [−3.7] = −4
nearest integer to
[x] means the nearest integer to x.

(This may also be written ⌊x⌉, ||x||, nint(xor Round(x). Not to be confused with the floor function, as described above.)
[2] = 2, [2.6] = 3, [-3.4] = -3, [4.49] = 4
1 if true, 0 otherwise
[S] maps a true statement S to 1 and a false statement S to 0.[0=5]=0, [7>0]=1, [2 ∈ {2,3,4}]=1, [5 ∈ {2,3,4}]=0
image of … under …
everywhere
f[X] means { f(x) : x ∈ X }, the image of the function f under the set X ⊆ dom(f).

(This may also be written as f(Xif there is no risk of confusing the image of f under Xwith the function application f of XAnother notation is Im fthe image of f under its domain.)
\sin [\mathbb{R}] = [-1, 1]
closed interval
[a,b] = \{x \in \mathbb{R} : a \le x \le b \}.0 and 1/2 are in the interval [0,1].
the commutator of
[gh] = g−1h−1gh (or ghg−1h−1), if gh ∈ G (a group).

[ab] = ab − ba, if ab ∈ R (a ring or commutative algebra).
xy = x[xy] (group theory).

[ABC] = A[BC] + [AC]B (ring theory).
the triple scalar product of
[abc] = a × b · c, the scalar product of a × b with c.[abc] = [bca] = [cab].
( )

( , )
(\ ) \!\,

(\ ,\ ) \!\,
function application
of
f(x) means the value of the function f at the element x.If f(x) := x2, then f(3) = 32 = 9.
image of … under …
everywhere
f(X) means { f(x) : x ∈ X }, the image of the function f under the set X ⊆ dom(f).

(This may also be written as f[Xif there is a risk of confusing the image of f under Xwith the function application f of XAnother notation is Im fthe image of f under its domain.)
\sin (\mathbb{R}) = [-1, 1]
precedence grouping
parentheses
everywhere
Perform the operations inside the parentheses first.(8/4)/2 = 2/2 = 1, but 8/(4/2) = 8/2 = 4.
tuple; n-tuple;
ordered pair/triple/etc;
row vector; sequence
everywhere
An ordered list (or sequence, or horizontal vector, or row vector) of values.
(Note that the notation (a,bis ambiguous: it could be an ordered pair or an open interval. Set theorists and computer scientists often use angle brackets ⟨ ⟩ instead of parentheses.)
(ab) is an ordered pair (or 2-tuple).
(abc) is an ordered triple (or 3-tuple).
( ) is the empty tuple (or 0-tuple).
highest common factor;
greatest common divisor; hcf; gcd
number theory
(ab) means the highest common factor of a and b.

(This may also be written hcf(abor gcd(ab).)
(3, 7) = 1 (they are coprime); (15, 25) = 5.
( , )

] , [
(\ ,\ ) \!\,

]\ ,\ [ \!\,
open interval
(a,b) = \{x \in \mathbb{R} : a < x < b \}.
(Note that the notation (a,bis ambiguous: it could be an ordered pair or an open interval. The notation ]a,bcan be used instead.)
4 is not in the interval (4, 18).
(0, +∞) equals the set of positive real numbers.
( , ]

] , ]
(\ ,\ ] \!\,

]\ ,\ ] \!\,
half-open interval;
left-open interval
(a,b] = \{x \in \mathbb{R} : a < x \le b \}.(−1, 7] and (−∞, −1]
[ , )

[ , [
[\ ,\ ) \!\,

[\ ,\ [ \!\,
half-open interval;
right-open interval
[a,b) = \{x \in \mathbb{R} : a \le x < b \}.[4, 18) and [1, +∞)
⟨⟩

⟨,⟩
\langle\ \rangle \!\,

\langle\ ,\ \rangle \!\,
inner product of
u,v⟩ means the inner product of u and v, where u and v are members of an inner product space.

Note that the notation ⟨uv⟩ may be ambiguous: it could mean the inner product or thelinear span.

There are many variants of the notation, such as ⟨u | v⟩ and (u | v), which are described below. For spatial vectors, the dot product notation, x·y is common. For matrices, the colon notation A : B may be used. As ⟨ and ⟩ can be hard to type, the more “keyboard friendly” forms < and > are sometimes seen. These are avoided in mathematical texts.
The standard inner product between two vectors x = (2, 3) and y = (−1, 5) is:
⟨x, y⟩ = 2 × −1 + 3 × 5 = 13
average of
let S be a subset of N for example,  \langle S \rangle  represents the average of all the element in S.for a time series :g(t) (t = 1, 2,...)
we can define the structure functions Sq(\tau):
S_q = \langle |g(t + \tau) - g(t)|^q  \rangle_t
(linear) span of;
linear hull of
S⟩ means the span of S ⊆ V. That is, it is the intersection of all subspaces of Vwhich contain S.
u1u2, …⟩is shorthand for ⟨{u1u2, …}⟩.

Note that the notation ⟨uv⟩ may be ambiguous: it could mean the inner product or the linear span.

The span of S may also be written as Sp(S).
\left\lang \left( \begin{smallmatrix} 1 \\ 0 \\ 0 \end{smallmatrix} \right), \left( \begin{smallmatrix} 0 \\ 1 \\ 0 \end{smallmatrix} \right), \left( \begin{smallmatrix} 0 \\ 0 \\ 1 \end{smallmatrix} \right) \right\rang = \mathbb{R}^3.
subgroup generated by a set
the subgroup generated by
 \langle S \rangle  means the smallest subgroup of G (where S ⊆ G, a group) containing every element of S.
 \langle g_1, g_2, \ldots, \rangle  is shorthand for  \langle g_1, g_2, \ldots \rangle .
In S3 \langle(1 \; 2) \rangle  = \{id,\; (1 \; 2)\}  and  \langle (1 \; 2 \; 3) \rangle = \{id, \; (1 \; 2 \; 3),(1 \; 2 \; 3))\} .
tuple; n-tuple;
ordered pair/triple/etc;
row vector; sequence
everywhere
An ordered list (or sequence, or horizontal vector, or row vector) of values.
(The notation (a,bis often used as well.)
 \langle a, b \rangle  is an ordered pair (or 2-tuple).
 \langle a, b, c \rangle  is an ordered triple (or 3-tuple).
 \langle \rangle  is the empty tuple (or 0-tuple).
⟨|⟩

(|)
\langle\ |\ \rangle \!\,

(\ |\ ) \!\,
inner product of
u | v⟩ means the inner product of u and v, where u and v are members of an inner product space.[9] (u | v) means the same.

Another variant of the notation is ⟨uv⟩ which is described above. For spatial vectors, the dot product notation, x·y is common. For matrices, the colon notation A : B may be used. As ⟨ and ⟩ can be hard to type, the more “keyboard friendly” forms < and > are sometimes seen. These are avoided in mathematical texts.
|⟩
|\ \rangle \!\,
the ket …;
the vector …
|φ⟩ means the vector with label φ, which is in a Hilbert space.qubit's state can be represented as α|0⟩+ β|1⟩, where α and β are complex numbers s.t. |α|2 + |β|2 = 1.
⟨|
\langle\ | \!\,
the bra …;
the dual of …
φ| means the dual of the vector |φ⟩, a linear functional which maps a ket |ψ⟩ onto the inner product ⟨φ|ψ⟩.
\sum
sum over … from … to … of
\sum_{k=1}^{n}{a_k} means a_1 + a_2 + \cdots + a_n.\sum_{k=1}^{4}{k^2} = 1^2 + 2^2 + 3^2 + 4^2 ::= 1 + 4 + 9 + 16 = 30
\prod
product over … from … to … of
\prod_{k=1}^na_k means a_1 a_2 \dots a_n.\prod_{k=1}^4(k+2) = (1+2)(2+2)(3+2)(4+2) ::= 3 \times 4 \times 5 \times 6 = 360
the Cartesian product of;
the direct product of
\prod_{i=0}^{n}{Y_i} means the set of all (n+1)-tuples
(y0, …, yn).
\prod_{n=1}^{3}{\mathbb{R}} = \mathbb{R}\times\mathbb{R}\times\mathbb{R} = \mathbb{R}^3
\coprod \!\,
coproduct over … from … to … of
A general construction which subsumes the disjoint union of sets and of topological spaces, the free product of groups, and the direct sum of modules and vector spaces. The coproduct of a family of objects is essentially the "least specific" object to which each object in the family admits a morphism.
\Delta \!\,
delta;
change in
Δx means a (non-infinitesimal) change in x.

(If the change becomes infinitesimal, δ and even d are used instead. Not to be confused with the symmetric difference, written ∆, above.)
\tfrac{\Delta y}{\Delta x} is the gradient of a straight line
Laplace operator
The Laplace operator is a second order differential operator in n-dimensionalEuclidean spaceIf ƒ is a twice-differentiable real-valued function, then the Laplacian of ƒ is defined by  \Delta f = \nabla^2 f = \nabla \cdot \nabla f
\delta \!\,
Dirac delta of
\delta(x) = \begin{cases} \infty, & x = 0 \\ 0, & x \ne 0 \end{cases}δ(x)
Kronecker delta of
\delta_{ij} = \begin{cases} 1, & i = j \\ 0, & i \ne j \end{cases}δij
Functional derivative of

\begin{align}
\left\langle \frac{\delta F[\varphi(x)]}{\delta\varphi(x)}, f(x) \right\rangle 
&= \int \frac{\delta F[\varphi(x)]}{\delta\varphi(x')} f(x')dx' \\
&= \lim_{\varepsilon\to 0}\frac{F[\varphi(x)+\varepsilon f(x)]-F[\varphi(x)]}{\varepsilon} \\
&= \left.\frac{d}{d\epsilon}F[\varphi+\epsilon f]\right|_{\epsilon=0}.
\end{align}

\frac{\delta V(r)}{\delta \rho(r')} = \frac{1}{4\pi\epsilon_0|r-r'|}.
\partial \!\,
partial;
d
f/∂xi means the partial derivative of f with respect to xi, where f is a function on (x1, …,xn).If f(x,y) := x2y, then ∂f/∂x = 2xy
boundary of
M means the boundary of M∂{x : ||x|| ≤ 2} = {x : ||x|| = 2}
degree of
f means the degree of the polynomial f.

(This may also be written deg f.)
∂(x2 − 1) = 2
\nabla \!\, f (x1, …, xn) is the vector of partial derivatives (∂f / ∂x1, …, ∂f / ∂xn).If f (x,y,z) := 3xy + z², then ∇f = (3y, 3x, 2z)
del dot;
divergence of
 \nabla \cdot \vec v = {\partial v_x \over \partial x} + {\partial v_y \over \partial y} + {\partial v_z \over \partial z} If  \vec v := 3xy\mathbf{i}+y^2 z\mathbf{j}+5\mathbf{k} , then  \nabla \cdot \vec v = 3y + 2yz .
curl of
 \nabla \times \vec v = \left( {\partial v_z \over \partial y} - {\partial v_y \over \partial z} \right) \mathbf{i}
 + \left( {\partial v_x \over \partial z} - {\partial v_z \over \partial x} \right) \mathbf{j} + \left( {\partial v_y \over \partial x} - {\partial v_x \over \partial y} \right) \mathbf{k}
If  \vec v := 3xy\mathbf{i}+y^2 z\mathbf{j}+5\mathbf{k} , then  \nabla\times\vec v = -y^2\mathbf{i} - 3x\mathbf{k} .
' \!\,
… prime;
derivative of
f ′(x) means the derivative of the function f at the point x, i.e., the slope of the tangent to fat x.

(The single-quote character ' is sometimes used instead, especially in ASCII text.)
If f(x) := x2, then f ′(x) = 2x
\dot{\,} \!\,
… dot;
time derivative of
\dot{x} means the derivative of x with respect to time. That is \dot{x}(t)=\frac{\partial}{\partial t}x(t).If x(t) := t2, then \dot{x}(t)=2t.
\int \!\,
indefinite integral of
the antiderivative of
∫ f(x) dx means a function whose derivative is f.x2 dx = x3/3 + C
integral from … to … of … with respect to
ab f(x) dx means the signed area between the x-axis and the graph of the function fbetween x = a and x = b.\int_{a}^{b} x^2 dx= \frac{b^3 - a^3}{3}
line/ path/ curve/ integral of… along…
C f ds means the integral of f along the curve C\textstyle \int_a^b f(\mathbf{r}(t)) |\mathbf{r}'(t)|\, dt, where r is a parametrization of C.

(If the curve is closed, the symbol ∮ may be used instead, as described below.)
\oint \!\,
Contour integral;
closed line integral
contour integral of
Similar to the integral, but used to denote a single integration over a closed curve or loop. It is sometimes used in physics texts involving equations regarding Gauss's Law, and while these formulas involve a closed surface integral, the representations describe only the first integration of the volume over the enclosing surface. Instances where the latter requires simultaneous double integration, the symbol  would be more appropriate. A third related symbol is the closed volume integral, denoted by the symbol .
The contour integral can also frequently be found with a subscript capital letter C, ∮C, denoting that a closed loop integral is, in fact, around a contour C, or sometimes dually appropriately, a circle C. In representations of Gauss's Law, a subscript capital S, ∮S, is used to denote that the integration is over a closed surface.
If C is a Jordan curve about 0, then \oint_C {1 \over z}\,dz = 2\pi i.
\pi \!\,
Projection of
\pi_{a_1, \ldots,a_n}( R ) restricts R to the \{a_1,\ldots,a_n\} attribute set.\pi_{\text{Age,Weight}}(\text{Person})
pi;
3.1415926;
≈22÷7
Used in various formulas involving circles; π is equivalent to the amount of area a circle would take up in a square of equal width with an area of 4 square units, roughly 3.14/4. It is also the ratio of the circumference to the diameter of a circle.AR2=314.16→R=10
 \sigma \!\,
Selection of
The selection \sigma_{a \theta b}( R ) selects all those tuples in R for which \theta holds between the aand the b attribute. The selection \sigma_{a \theta v}( R ) selects all those tuples in R for which \thetaholds between the a attribute and the value v.\sigma_{Age \ge 34}( Person )
\sigma_{Age = Weight}( Person )
<: br="">
<: \!\,

{<}{\cdot} \!\,
is covered by
x <• y means that x is covered by y.{1, 8} <• {1, 3, 8} among the subsets of {1, 2, …, 10} ordered by containment.
is a subtype of
T1 <: i="" nbsp="">T
2 means that T1 is a subtype of T2.If S <: i="" nbsp="">T and T <: i="" nbsp="">U then S <: i="" nbsp="">U (transitivity). {}^\dagger \!\,
conjugate transpose;
adjoint;
Hermitian adjoint/conjugate/transpose
A means the transpose of the complex conjugate of A.[10]

This may also be written A*TAT*A*AT or AT.If A = (aij) then A = (aji).
T
{}^{\mathsf{T}} \!\,
transpose
AT means A, but with its rows swapped for columns.

This may also be written A', At or Atr.If A = (aij) then AT = (aji).
\top \!\,
the top element
⊤ means the largest element of a lattice.∀x : x ∨ ⊤ = ⊤
the top type; top
⊤ means the top or universal type; every type in the type system of interest is a subtype of top.∀ types TT <: td="">
\bot \!\,
is perpendicular to
x ⊥ y means x is perpendicular to y; or more generally x is orthogonal to y.If l ⊥ m and m ⊥ n in the plane, then l || n.
orthogonal/ perpendicular complement of;
perp
W means the orthogonal complement of W (where W is a subspace of the inner product space V), the set of all vectors in V orthogonal to every vector in W.Within \mathbb{R}^3(\mathbb{R}^2)^{\perp} \cong \mathbb{R}.
is coprime to
x ⊥ y means x has no factor greater than 1 in common with y.34  ⊥  55.
is independent of
A ⊥ B means A is an event whose probability is independent of event B.If A ⊥ B, then P(A|B) = P(A).
the bottom element
⊥ means the smallest element of a lattice.∀x : x ∧ ⊥ = ⊥
the bottom type;
bot
⊥ means the bottom type (a.k.a. the zero type or empty type); bottom is the subtype of every type in the type system.∀ types T, ⊥ <: i="" nbsp="">T
is comparable to
x ⊥ y means that x is comparable to y.{eπ} ⊥ {1, 2, e, 3, π} under set containment.
\vDash \!\,
entails
A  B means the sentence A entails the sentence B, that is in every model in which A is true, B is also true.A  A ∨ ¬A
\vdash \!\,
infers;
is derived from
x  y means y is derivable from x.A → B  ¬B → ¬A.
is a partition of
p  n means that p is a partition of n.(4,3,1,1)    9,  \sum_{\lambda \vdash n} (f_\lambda)^2 = n!.
\vdots \!\,
\vdots \!\,
vertical ellipsis
everywhere
Denotes that certain constants and terms are missing out (e.g. for clarity) and that only the important terms are being listed. P(r,t) = \chi \vdots E(r,t_1)E(r,t_2)E(r,t_3)

[edit]Variations

In mathematics written in Arabic, some symbols may be reversed to make right-to-left writing and reading easier.[11]

[edit]See also

[edit]References

  1. ^ Rónyai, Lajos (1998), Algoritmusok(Algorithms), TYPOTEX, ISBN 963-9132-16-0
  2. ^ Berman, Kenneth A; Paul, Jerome L. (2005), Algorithms: Sequential, Parallel, and DistributedBoston: Course Technology, p. 822, ISBN 0-534-42057-5
  3. ^ Nielsen, Michael A; Chuang, Isaac L (2000), Quantum Computation and Quantum InformationNew YorkCambridge University Press, pp. 71–72, ISBN 0-521-63503-9OCLC 43641333
  4. ^ Nielsen, Michael A; Chuang, Isaac L (2000), Quantum Computation and Quantum InformationNew YorkCambridge University Press, p. 66, ISBN 0-521-63503-9OCLC 43641333
  5. ^ Copi, Irving M.Cohen, Carl (1990) [1953], "Chapter 8.3: Conditional Statements and Material Implication", Introduction to Logic (8th ed.),New YorkMacmillan, pp. 268–269, ISBN 0-02-325035-6LCCN 8937742
  6. a b c d e Goldrei, Derek (1996), Classic Set Theory, London: Chapman and Hall, p. 3, ISBN 0-412-60610-0
  7. a b c d Goldrei, Derek (1996), Classic Set Theory, London: Chapman and Hall, p. 4, ISBN 0-412-60610-0
  8. ^ Goldrei, Derek (1996), Classic Set Theory, London: Chapman and Hall, p. 5, ISBN 0-412-60610-0
  9. ^ Nielsen, Michael A; Chuang, Isaac L (2000), Quantum Computation and Quantum InformationNew YorkCambridge University Press, p. 62, ISBN 0-521-63503-9OCLC 43641333
  10. ^ Nielsen, Michael A; Chuang, Isaac L (2000), Quantum Computation and Quantum InformationNew YorkCambridge University Press, pp. 69–70, ISBN 0-521-63503-9OCLC 43641333
  11. ^ M. Benatia, A. Lazrik, and K. Sami, "Arabic mathematical symbols in Unicode", 27th Internationalization and Unicode Conference, 2005.

[edit]External links

Some Unicode charts of mathematical operators:
Some Unicode cross-references: